1. Preparation
Before we start disassembling the oil pressure gauge, we need to prepare the following tools:
1. Wrench: used to remove the screws connecting the oil pressure gauge.
2. Screwdriver: used to remove the terminal block.
3. Tape: used to protect the dashboard and prevent the screws from sliding during disassembly.
4. Plastic scraper: used to disassemble the dashboard.
2. Disassembly steps
1. First, you need to open the dashboard of the vehicle. Please refer to the vehicle's maintenance manual for specific methods. If you are not sure how to open the dashboard, please consult a professional technician.
2. Next, find the screws connected to the oil pressure gauge, use a wrench to remove the screws, and store the screws and terminal blocks in a safe place for reinstallation.
3. Before disassembling the oil pressure gauge, you need to stick the tape on the dashboard around the oil pressure gauge to prevent the screws from slipping and causing damage.
4. Use a plastic scraper to gently disassemble the oil pressure gauge. Be careful not to use too much force to avoid damaging the dashboard.
5. When the oil pressure gauge is removed, the wiring terminals need to be removed. Use a screwdriver to gently loosen the terminals and completely remove the oil pressure gauge from the vehicle.
III. Precautions
1. Before removing the oil pressure gauge, be sure to turn off the power of the vehicle to avoid short circuits.
2. During the removal process, you need to be careful to avoid damaging the dashboard or oil pressure gauge.
3. When reinstalling the oil pressure gauge, make sure the connection is correct and install it according to the vehicle's maintenance manual. If you are unsure, please consult a professional technician.
4. When installing, try to avoid using too much force to avoid damaging the oil pressure gauge or dashboard.
