1. Select a suitable installation location
First, the location where the oil pressure gauge is installed should be close to the pressure equipment being measured, and the direction it faces should be perpendicular to the pressure direction of the equipment being measured. Secondly, avoid installing the oil pressure gauge in a location that is susceptible to vibration, shock, extreme temperature or corrosive environment, and ensure that the installation environment is dry and clean. Finally, in order to facilitate operators to read data and daily maintenance and replacement, the choice of installation location should also take into account the convenience of these actual operations.
2. Correct installation steps
When installing the oil pressure gauge, strictly follow the product manual. First, ensure that the electrical wiring is correct and has good grounding protection. Secondly, it is necessary to select an appropriate pipeline connection method to ensure that the pipeline connection is stable and prevent oil or gas leakage. Finally, according to the actual working pressure range of the equipment being measured, select the appropriate oil pressure gauge range and accuracy level.
3. Necessary precautions
Before installation, carefully check the appearance and internal structure of the oil pressure gauge to ensure that it is intact, and perform necessary pressure tests. In addition, pay attention to factors such as temperature and humidity of the installation environment to ensure the measurement accuracy of the oil pressure gauge. Finally, the oil pressure gauge should be regularly inspected and maintained during use, including battery replacement.
